Wheel Dolly - Qty 2

Video Transcript for Performance Tool Carts and Dollies - Wheel Dolly - PTW54013 Review

Male: Today we're going to be taking a look at part number PTW54013. This is the Performance Tool wheel dolly set. It's a two piece dolly set that's going to help move your car, riding mower, trailer in any direction with just a push. It can be used for many applications. Really simple system that just helps make storage, service and restoration much easier. The wheels are going to have a swivel ball bearing design when it comes to the castor assembly, so that's going to allow them to rotate 360 degrees for easy movement.

It is equipped with cast iron wheels for maximum durability. Each dolly is going to have a capacity of 1000 pounds. They are going to be made from a steel construction and again the wheels are going to be cast iron. It seems to have a nice durable black powder coat finish to it. You can imagine how they would work, the directions for using them are printed on the sticker that's right here on each dolly. You just want to follow those guidelines to get fully set up.

Basically, the dolly is going to cradle your wheel and if you have four of these, one on each wheel, you can just imagine that all you have to do is just push the vehicle and then the dolly is going to be able to rotate so you can position the vehicle how ever you need it. Again, when it comes to storage, service and restoration, these are really going to come in handy. This part number includes two, again 1000 pound capacity per dolly. A few measurements to go over with you, real quick. We'll take a measurement of the dolly height, measuring from the ground to the top of this bar right here, that's going to be about five and a half inches. If we measure to the bottom of the wheel tray, from the ground to the bottom of that wheel tray is going to be about two and a half inches.

This will accept tires up to 14 inches wide. Taking a look at the overall width, that's going to be about 15 and a half inches, each dolly is going to be the same. Overall length from back to front, that's going to be about 23 and a half inches. Then the length of the wheel tray area, that's going to measure about 16 inches, then you have the flat piece at the front and back. Again, really nice design, assembly is pretty simple. The castors are going to attach to each corner of the dolly with four bolts and other necessary hardware.

It has a washer on the bottom as well as a nylon lock nut. That's going to do it for today's look at part number PTW54013.